Operation and Safety Guide
Jack Hammer Trolley
JHT
Created by: Michael Chen Revision Level: 4
Company: Makinex Revision Date: 08/19/14
SAFETY TOPICS:
Read and understand the operator’s
Manual, or “Operations and Safety Guide”
before using this machine. Failure to
follow operating instructions could
result in death or serious injury.
SAFETY CHECKLIST:
Always wear safety goggles, ear
protection and hard toe shoes when
operating this equipment.
Always ensure machine is switched OFF
before plugging in.
Always ensure the chisel or scraper shaft
is correctly inserted and locked in position
before use.
Always inspect the Jack Hammer Trolley
for any signs of damage before use. Do
not use if it appears damaged.
Do not wear loose clothing while operating
this machine. Loose material may become
caught in the mechanism.
Do not touch the Jack Hammer chisel or
shaft while in operation.
Do not operate if you have a known
medical condition which may affect your
ability to safety operate the Jack Hammer
Trolley.
Always maintain a correct stance while
operating the Jack Hammer Trolley to
avoid injury.
Always use on a flat, level surface.
Always use a dedicated power supply with
an extension cord that does not exceed 30
feet in length.
Always switch OFF the machine before
unplugging.
Tool Application: The Jack Hammer Trolley is used in conjunction with a 30-
35lb. Jack Hammer or Breaker for the removal of most types of flooring inclusive
of; wood, ceramic and stone tile, vinyl, linoleum, and carpet.
Tool Setup:
Select appropriate Makinex scraper attachment for use. The wide
chisel is primarily for use to remove tiles on a sanded cement
bed. The Tile Smasher attachment is recommended for use on a
concrete surface for the removal of wood, vinyl, carpet, ceramic &
stone tiles.
Carefully place the Jack Hammer Trolley onto its back (A) and
mount the chosen scraper attachment by following the
manufacturer’s instructions for the hammer/breaker.
After returning the Jack Hammer Trolley to its upright position, lift
handles to take weight off lock mechanism then pull the brake
lever to disengage the lock mechanism. (B)
Lift or lower the height of the handles to achieve the desired angle
of the Jack Hammer Trolley (C).
Release brake lever to re-engage the lock mechanism.
Ensure hammer/breaker is properly secured in the clamping
mechanism of the trolley and cannot rotate.
Never allow hammer/breaker or chisel/scraper to overheat. (Refer
to Jack Hammer manufacturer for continuous usage
guidelines). Take regular breaks to avoid user fatigue and wear
on hammer/breaker.
Turn on the power switch of the hammer/breaker.
Place both hands on handle and place a foot on the footrest.
Maintain a straight back and proceed in a slow, steady linear
motion while operating the Jack Hammer Trolley. (D)
Vendor Website: www.makinexusa.com Makinex Support Phone #: US 407-446-1966, 407-826-0000
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals